Product Price
| Color | FOB Price/USD/KG |
| 100 varnish | 8.86 |
| 102 white | 8.74 |
| 201 dark yellow | 9.35 |
| 203 original yellow | 9.35 |
| 300 rose red | 9.35 |
| 302 red | 9.35 |
| 306 orange | 9.71 |
| 3038 Lightfast Purple Pink | 12.14 |
| 401 purple | 13.36 |
| 403 original blue | 9.35 |
| 404 Ultramarine | 9.35 |
| 408 Emerald Blue | 9.35 |
| 501 black | 8.74 |
| 601 green | 9.35 |
| 801 silver | 17.00 |
| 131 fluorescent yellow | 11.17 |
| 133 fluorescent red | 11.17 |
| 137 fluorescent orange | 11.17 |
| 141A fluorescent purple | 11.17 |
| 148A fluorescent blue | 11.17 |
| 159 fluorescent pink | 11.17 |
| 007 curing agent | 32.06 |
Welcome to be our agent and received a special agent price! Please contact us for more information. Thanks for your always support.
Product Description
Especially for nylon cloth and shoe materials. It is also suitable for printing on some PU, TPU, treated rubber and various denim fabrics.
Shelf life: 6 months when stored at room temperature. (0>40ºC)Environmental standards:
1: Comply with the safety standards for "fulmarin" (formaldehyde) set by the Japanese Ministry of Health and Welfare (Showa 49-34).
2: Comply with the EU Directive (2002/61/EC) prohibiting the content of azo dyes (AZO) not exceeding 30mg.
3: Comply with EU EN71 PART 3 standards for heavy metal content.
4: Comply with GB/T 7573 Textile Water Extract pH Value Determination Standard.
5: Comply with the European Union's safety standards (2003/53/EC) for "alkylphenol polyoxyethylene ethers" (APEO).
6: Does not contain PVC (measurement method: FTIR)
Process: Printing (1200-1500 mesh mesh) --- air drying (60-70ºC, 3-5 minutes) or heat treatment (150ºC, 2-3 minutes)
Product features: soft hand feel, good resilience, good adhesion, wear resistance, yellowing resistance, and washing resistance.
Precautions:
1: If the fabric texture is thick, you can use 100% NY-100 as a base to get a better feel and smoothness of the printed surface.
2: Adding 3-5% WG-002 cross-linking agent can improve the adhesion, dry and wet wiping and anti-stick properties of the printing surface. After adding the cross-linking agent, the slurry should be used up within 8 hours.
3: Fully drying and then heat treatment can reduce the stickiness of the printed surface.
4: When you need to stop during the printing process, you should seal the net in time or clean it with clean water, otherwise it will easily cause the net to be blocked.
5: According to printing needs, 5-8% pure water or 2-5% WG-004 slow drying agent can be added appropriately.
6: Different substrates and environments will produce different printing effects, please do sufficient testing before reproducing.
Reminder:
1. Before using this product, users should fully read the instructions for use and test the suitability of different batches of inks. After actual trial printing, they can be used in batches only after they are confirmed to be qualified;
2. The endurance test data in the above items are the results tested under the company's test conditions and are not listed as guaranteed values.
Company Profile
ZHONGYI INK& PAINT CO.,LTDFounded in 1990, located in Zhongshan city, the hometown of great man Mr. Sun Yat Sen.ZHONGYI ,a large enterprise integrating science ,technology and trade with more than 50 unit of area, is mainly engaged in the research and manufacture of high quality printing ink as well as various relevant complementary equipment.
Certifications
Zhongyi has obtained ISO 9001 Quality Management System Certification, ISO 14001 Environmental Management System Certification, as well as compliance with the European Union EN-71PART3, U.S. ASTM-F963-11, Japan ST-MARKPART3, and European Union RoHS environmental testing standards. Currently, the company holds over a dozen patentsDetailed Photos
FAQ
Q1: Are you a manufacturer or a trade company?
A1:We are an authentic factory with over 30 years only specializing in printing ink.
Q2: What's your MOQ?
1kg is ok.
Q3: What to do for specific color and other feature requirements from our company ?
A: We provide customers with the option to choose inks based on specific color requirements or specific characteristics, such as drying speed, odor, fade resistance, gloss, and more. To ensure we meet your exact needs, kindly send us a detailed ink sample or specify the Pantone number, and we will produce your order with utmost precision.
Q4: Can I get the sample ?
A: We are delighted to offer you complimentary samples for testing purposes. Typically, we provide 1 kg of samples free of charge, and we kindly request your support in covering the air courier freight costs. Please note that this expense can be reimbursed to you upon placing your initial order with us.
Q5: Can I take my own brand and label on the packing ?
A: Yes, we can provide the OEM with the customer's brand and label.
