0.65m to 3.68m Width Polyeter Silk Screen Printing Mesh

Polyeter silk screen printing mesh


MAISHI is different from other polyester silk screen printing mesh suppliers.
We are manufacturer and offer 100% polyester material.
We strictly control each production process.


Production process
Polyester printing mesh material yarn is from Jintong, Switzerland and Japan, we inspect those yarn arrived (tolerance, tensile strength, physics test etc.).

During production, first we put the warp wires on the beam, drawing the warp wires into heddle and reed. Then our experienced weaver will start weaving mesh according to orders.

Initial survey is taken during and after weaving. Then the heat setting treatment and physical properties inspection will be done before we get tentative finished rolls (normally 60-500 meters rolls).

In the end, after the final inspection, we will cut the mesh into small rolls (20m-50m) according to customer orders.




And MAISHI offer wide range of the polyester printing mesh specifications.


Specifications
1. Polyester printing mesh count: 6T(15mesh)-165T(420mesh)
2. Thread diameter:0.031mm-0.4mm
2. Width: 0.6m -3.65m
3. Color: White, Yellow, Black
4. Roll length: 30m, 50m, 30yards, 50yards, any length available at request

TYPE	MEHS COUNT	APERTURE	THREAD DIAMETER	OPENING	THICKNESS	INK THROUGH VOLUME THEORETICALLY	TENSILE STRENGTH
	Mesh/inch	Micron	Micron	%	Micron	Cm3/m2	N/cm
6-400	15	1300	400	65	780-810	560	110
8-300	20	970	300	58	550-580	406	100
10-250	25	700	250	49	508-518	355	85
12-140	30	700	140	69	250-260	380	50
12-250	30	610	250	53	495-505	305	90
15-250	38	467	250	49	489-501	213	83
18-150	45	410	150	53	255-275	138	60
21-80	55	378	80	68	125-140	125	36
21-150	55	330	150	46	250-260	123	55
24-100	60	316	100	57	188-195	109	49
24-120	60	303	120	51	230-240	104	51
32-80	80	237	80	55	120-130	110	40
30-120	75	213	120	41	205-210	102	52
32-100	80	212	100	46	160-170	69	48.5
36-80	90	202	80	51	145-150	70	45
36-90	90	185	90	45	155-165	65	49
36-100	90	182	100	41	175-185	60	51
39-55	100	195	55	56	76-83	55	24
39-80	100	176	80	48	125-135	73	31
43-80	110	147	80	40.8	118-125	53	31
47-55	120	152	55	51	88-96	47.6	29
48-70	120	135	70	41	108-120	45.5	30
53-48	135	139	48	55	85-90	48	26
53-55	135	128	55	47	88-96	44.5	29
54-64	137	115	64	38.5	85-95	38.9	30
54-70	137	108	70	34	108-120	40	31
58-55	145	118	55	38	89-94	39.5	30
59-55	150	114	55	45	85-90	38	30
61-48	155	115	48	49	76-83	41	30
62-64	155	105	64	42	115-125	33	31
64-45	160	105	48	43	73-82	36.5	28
64-55	160	98	55	38	95-99	36.1	30
64-64	160	88	64	30	100-110	30.7	31
68-55	175	85	55	34	85-95	29.2	30
68-64	175	78	64	29	108-110	32.0	32
72-48	180	90	48	36	68-75	33.1	28
72-55	180	86	55	37	95-105	32.2	33
77-48	195	81	48	34	80-85	29.0	28
77-55	195	75	55	28	86-92	26.6	29
80-48	200	72	48	33	75-84	28.7	27
90-48	230	56	48	25	70-80	23.5	25
100-40	250	58	40	37	66-73	21.3	28.5
110-40	280	52	40	33	68-75	20.5	29.6
120-31	305	49	31	36	60-64	19.5	29
120-34	305	45	34	30.5	60-70	18.4	30.5
120-40	305	37	40	21	65-67	13.5	32
130-34	330	42	34	30	50-55	16.5	31
140-34	355	31	34	19.5	52-58	14.4	31
150-31	380	36	31	29	47-50	13.1	30.5
150-34	380	30	34	20.5	48-53	14.9	30.5
165-31	420	31	31	22.5	42-48	12.5	28.9

MAISHI offer silk screen printing mesh with features and advantages as below:


Features
100% Polyester fabric mesh Material
Plain Weave
Excellent Tear Resistance
Excellent Dimensional Stability
Higher Tension Strength & Break Point
Low Elongation


Advantages
Faster tension without damage to the threads
Improved fabric strength
Faster tension stabilization
Higher tension threshold and breaking point
Less tension loss during the stretching process
Faster turnaround time from the screen room to the press-room
Improved registration due to stable tension
Faster Print Speeds


MAISHI is different, because we are responsible for our customers.
After the production, MAISHI has special wokers recheck the mesh quality before delivery, thus to make sure customers get perfect quality.


Quality checking include:
· Mesh Count inspect
· Thickness inspect
· Thread diameter& Hole size inspect
· Tensile Strength inspect
· Surface Tension test



Good products never afraid of looking closely.
Please kindly check the detailed image under the microscope.

MAISHI produce polyester mesh with 100% polyester, absolutely square hole, exact mesh counts per inch, and clear hole sizes.
While some of the suppliers offer polyester mesh with other mixture materials, so the wire performance is not very good. And their wire has flying edges, which will influence the ink put through. The hole size is not square, which will make the printing effect bad, and the wrong mesh count will take big damage to customers' printing.

Close view






Application

Screen printing mesh is widely used for many printing industries. Include:
1> Ceramic printing / Glaze printing


2> Garment Printing



3> Glass printing



4> PCB printing



And other applications include:

CD/DVD Printing,
Ceramic Decorating,
Graphic Screen Printing (Glass Containers, Labels,Large Format UV Graphic, Small Format UV Graphic, Solvent Graphics, Tubes and Cartridges),
Package Printing,
Printed Electronics,
Printing on Glass,
Solar Cell Printing,
Textile Printing,
Tableware.





Packing & Delivery

Packing
1.Fold the mesh into plastic bag ,then in carton.Suitable for small quantity and have no requirement on the crease.
2.Pack the mesh with paper tube and plastic bag,then in carton.Suitable for large quantity and the mesh has better surface then folding type.







Delivery
Usually we can ship the goods within 5-15days as we have stocks 500-2000m for different mesh count.
The exact order quantity will be checked according to our production status.



Payment
1) 100%T/T in advance if order amount less than USD10000.00
2) 30% paid in advance and 70% balance paid before shipment if order amount more than USD10000.00.
3) Irrevocable L/C at sight.
Any other payment term can be negotiatory.


More about MAISHI
Maishi is one of the top manufacturers and exporters of screen printing mesh.Our company was connected with production of metal wire mesh since 1986 and monofilament polyester screen printing mesh(bolting cloth) and nylon printing meh since 1995, in China. The machinery( Width 3900mm from Switzerland Sulzer and WJ1300/1600 A, B, D) and apparatus used in production process fully based on the high computer technology.
· Dedicated and experienced weavers.
· Consistent quality products.
· On-time delivery.
· We have 15 R&D technical staffs,with more than 10 years experience.
· 80% repeat customers.
· Reasonable claim refund system.

Mainly market : Our mesh sells good all around the world. Such as: North America (USA, Canada, Mexico), South America( Braizil, Chile, Argentina, Peru etc.), European country (Germany, France, Italy,Poland, etc.), Asia (UAE, Iraq, Iran, Thailand, Vietnam , Malaysia, Turkey, Pakistan, Bangladesh etc. )


MAISHI is different because we win by every details.
If you want to save time and energy, and enjoy long term stable good quality, welcome to contact us!